Rover Gen 4/5/6 Speed Unlock

These instructions only apply to the Rover Generation 4.0 and later models.

Official Rover Gen 4.0 Speed Setting Adjustment Instructions (250W)

Please follow these official instructions to change the speed setting on your e-bike. It is important to note that this procedure should be performed with care and only in compliance with local regulations.

Step 1: Access Speed Setting Mode

• Ensure your e-bike is powered on and operational.
• Navigate to the settings menu by holding down set.

Step 2: Enter Adjustment Mode

• To enter the adjustment mode, Scroll down to general set menu by using +-
• Press set button to open the general settings menu
• Navigate to 1.3 (speed limit) using +- buttons
• Press set

Step 3: Password Entry / Adjust Speed Limit

• Enter the password provided by Dirodi support. (use +- buttons to set numbers / press set to advance through each digit.
• Press set to confirm passcode. If entered correctly you will have access to adjust the speed limit.
• Use +- to adjust speed limit (the number will be highlighted in red).

Step 4: Confirm Changes

• Navigate back to the menu by using +- buttons and using set on << General Set or 1.9. Exit.

Step 5: Test and Verify

• Press save and exit. Test speed to verify by riding the bike in a safe environment.