Electric Bike Maintenance: What Owners Should Check

Keep the outside of the motor clean using the maker's cleaning method. Do not open the motor housing. If it becomes noisy, cuts out or behaves differently, contact support with the model details and a description of the problem.

E-bikes use lithium batteries in general, and there are certain things to keep in mind. For example, the place where you store your e-bike batteries should be between 1 and 36 degrees to avoid any damage to the battery. In other words, the storage should not be too hot or too cold. 

The easiest solution is to remove your battery (if removable) and store it inside. Storing the e-bike for a long duration will also require charging the battery every 3 months. If this is not done, the battery will drop below residual power. 

It is worth noting that using your battery's original charger is important, as otherwise, it may impact the lifespan of the battery.

It is important to note that electric bikes last longer if you reduce the amount of resistance at key points on your bike. Friction between parts of your e-bike, damage caused by dirt and rust, are some basic issues why components of your electric bike wear out. Thus, it is advisable that sufficient lubrication of your chain drive, wheels, and brakes avoid surfaces from coming into contact too often. 

Bike grease can also be used to prolong your e-bike's life - make sure your bearings and bottom bracket are suitably greased to reduce wear and tear. Exercise care while using lubes or sprays on surfaces closer to your battery contact points or other sensitive areas on your e-bike.

Using an air duster to clean any dust or dirt from behind the buttons on your LCD is advisable. These are actually mini computers on your e-bike, so, just like any computer, keep an eye on possible updates and check the manufacturer's website to see if you can keep it up to date.

Check tyre pressure with a gauge and follow the tyre, rim and bike instructions for your load. Low pressure can affect handling and increase the risk of damage. Excess pressure can make the ride harsh or exceed component limits.

Puncture-resistant tyres can still puncture. Inspect the tread and sidewalls and investigate recurring pressure loss rather than repeatedly pumping the tyre up.

Basically, all parts of your electric bicycle need your attention. Understanding simple factors such as the following might help in maintaining your e-bike and prevent potentially bigger problems that could occur.

- Keep your e-bike clean and use bike-specific or recommended cleaners.

- Avoid using a jet wash or similar, as it can drive the grease out of the bearings and may cause corrosion in certain parts.

- Store your e-bike in a dry place when not in use.

- Make sure that your handlebars and the stem in the front forks are secure.

- Ensure the firm attachment of both wheels, and make sure all parts are well lubricated.

- Ensure smooth movement of gears from one to another before starting your ride.

- Make sure your seat and brakes are adjusted according to the requirements of your ride.

Quite critical for the performance and efficiency of your e-bike and helps in enhancing the lifespan of your e-bike. Periodical maintenance is like a health check-up for your electric bike to make sure you have memorable and hassle-free rides over time.